RS Panel Filters (Pre filters, Fine Filters)
RS Panel Filters (Pre filters, Fine Filters)
RS Panel Filters are used to retain particles ranging from 1 micron to 50 microns. These filters are referred as the air intake filters and work on negative air pressure. We offer two types of Panel Filters such as Primary panel Filter and Secondary panel Filter (Fine filters). The Primary Filter is used for removing particles in range of 10 to 50 micron. These are also used to avoid loading on secondary filter. The Secondary Filters are ideally suitable for removing particle up to 10 micron.
Application:
- Commercial Buildings
- AHU’s
- Pre Filtration Application
Features:
- Easy to install
- Reduced energy cost
- Good mechanical strength.
- Retrofit to any standard make
- Low-pressure drop due to pleated configuration
- High dust holding capacity
- Washable & reusable
- Microbiologically inactive
- No dust penetration
Specifications:
- Flange type & Box type
- Customized sizes are available on request
Product Specification
|
Size (mm) |
610 x 610 x 50 / 100 / 150 / 300mm 545 x 545 x 50 / 100 / 150 / 300mm |
|
Filter media |
HDPE Mesh / imported Synthetic Fiber Media / Spun bonded polyester media |
|
Filtration efficiency |
80-90 % – G3 ,G4 , ISOCoarse, ePM10 95% – F5, ISO ePM10 97% -F7, ISO ePM10 95% – F8, ISO ePM2.5 99%-F9, ISO ePM1 |
|
Filtration Rating |
1,3,5,10, 15 , 20, 25 micron & more |
|
Frame Material |
SS 304 / GI (Galvanized Steel) / Aluminum / CRC powder coated or Zinc coated/Alu extrusion |